Epson 7850p - Manual (Page 44)

44 Using the Remote Control
Adjusting Color Corrections for a New Surface
Adjust the correction values if you’re projecting on a new surface or in
a new location.
1. Press the Wall Shot button on the remote control or projector
while you’re projecting an image. Wait for the Wall Shot status
screen.
2. Press the Wall Shot button until you see Wall Shot
Readjustment on the status screen.
You see a sequence of colors flash for about five seconds as the
projector adjusts the color correction values for the new
projection surface.
Operating Your Computer with the
Remote Control
If you’ve connected a computer to the projector with a USB cable, as
described on page 56, you can use the remote control in place of your
computer’s mouse. This gives you more flexibility when delivering
PowerPoint and other slideshow-style presentations, since you won’t
have to stand next to the computer to change slides.
Use to
move cursor
Left-click Right-click