EverFocus EFC--02-1-A - Manual (Page 10)

2
¾ Powerful alarm functions, ability to arm/disarm, specific fire alarm input with
corresponding door control, easy connection to alarm panel
¾ Built-in LCD screen and keypad allow basic configuration changes at the
controller
¾ Wiegand 26 and EverAccess RS232 formats supported
¾ Built-in transient voltage suppressor (TVS) to protect controller from electric
surge
Parts List
Please be careful when you unpack the box due to the electronics devices inside.
Check and make sure that you have all the items listed below inside the original box:
¾ 1 EverAccess Flex Series Controller
¾ 1 controller user manual
¾ 1 Flex Series software CD
¾ 1 software manual
¾ 2 supporting frames (left and right)
¾ 2 (3mm*6mm) screws (to mount the controller to the frames)
Please Note: If an item appears to have been damaged in shipment, replace it
properly in its carton and notify the shipper. If any items are missing, notify your
Everfocus Electronics Corp. Sales Representative or Customer Service. The
shipping carton is the safest container in which the unit may be transported. Save
it for possible future use.
In addition, you may order the following EverAccess products which are
recommended for use with the controller to achieve the best performance:
¾ EverAccess metal enclosure (part number EPN-871-B)
¾ EverAccess desktop reader (part number ERS-871)
¾ EverAccess proximity readers (part numbers ERR-871, ERK-871, ERM-
871)