EverFocus EFC--02-1-A - Manual (Page 29)

21
Fig.2.14 Connecting Alarm-sensor to Controller
Connection to Alarm Output
The alarm module provides 8 alarm inputs and 8 alarm outputs. The user can assign
the corresponding relay status to the different events. There are three terminals:
COM, N.O and N.C. The wiring depends on the alarm device. Please read the user
manual of the external alarm devices before wiring. Using the 5th channel alarm
signal output as an example, the wiring is shown in Fig. 2.15 and 2.16.
Fig. 2.15 Normally Open Connection for Alarm Output 5
Alarm sensor
for alarm in 5
Alarm input
GND
19
20
Alarm
modul e
External
Alarming
Device
C. terminal
N.O. termina l
COM
N.O .
Alarm
module
26
27
25