EverFocus EFC--02-1-A - Manual (Page 60)

52
Alarm IN 0
Alarm In 0 event will be generated when Alarm In 0 input is active. The default
setting for Alarm Action Setting and Extended Alarm Setting is: only Main alarm
output on main module has alarm output per Alarm In 0 event, as shown in the
following two figures, respectively. Change settings according to sections “Enter
Alarm Action Setting Sub-menu” and “Enter Extended Alarm Setting Sub-menu”.
Remote Alarm
System administrator can directly generate alarm signal using control software when
he observes abnormal condition through surveillance system such as CCTV. This is
defined as a Remote Alarm event. The default setting for Alarm Action Setting and
Extended Alarm Setting is: only Main alarm output on main module has alarm output
per remote alarm event, as shown in the following two figures, respectively. Change
settings according to sections “Enter Alarm Action Setting Sub-menu” and “Enter
Extended Alarm Setting Sub-menu”.
Unknown Card
Unknown card refers to a card that is never logged in the system. An Unknown Card
event will be generated when an unknown card is swiped on the reader. The default
setting for Alarm Action Setting and Extended Alarm Setting is: no alarm output is
generated per unknown card event, as shown in the following two figures,
respectively. Change settings according to sections “Enter Alarm Action Setting Sub-
menu” and “Enter Extended Alarm Setting Sub-menu”.
Expired Card
Any card in the system is usually assigned a valid date. After the valid date is passed
the controller will automatically set the card as an expired card. An expired card
cannot gain access to the system. At the same time, an Expired Card event will be
generated when an expired card is swiped on the reader. The default setting for Alarm
Action Setting and Extended Alarm Setting is: no alarm output is generated per
expired card event, as shown in the following two figures, respectively. Change
settings according to sections “Enter Alarm Action Setting Sub-menu” and “Enter
Extended Alarm Setting Sub-menu”.
Unknown Card
NNNNNNNN Unknown Card
NNNNNNNN-NN
Remote Alarm
NNNNNNNN
Alarm In 0
NNNNNNNN-YN Alarm In 0
NNNNNNNN
Remote Alarm
NNNNNNNN-YN