EverFocus EFC--02-1-A - Manual (Page 41)

33
Controller Functionality
and Configuration
Please Note: If you are using the EverAccess Flex Series Software skip to
Chapter 6.
This chapter introduces system functions and their corresponding operations. Most
basic operations can be performed on the controller keypad. Some advanced
functions require the EverAccess Flex Series software. Please refer to the software
manual for more details.
General Operation Guideline
1 2 3 ARM
4 5 6 ▲
7 8 9 ▼
CLR 0 ENT SYS
The controller’s 4x4 keypad is shown above. enters the system menu, ARM arms
or disarms the system. The system menu is organized in a multiple-level structure.
and toggle between the same level menu. cancels or exits back to the
higher level menu.
Enter System Configuration
After the system installation is complete, the controller LCD will display the current
date and time. This display is the default screen, and will be displayed until the user
logs in to the system configuration by entering a password. After logging in to the
system administration, pressing the CLR key once for each menu level will log the
user out. In addition, after one minute of inactivity, the controller will automatically
log the user out.
Chapter
5
CLR
SYS