EverFocus EFC--02-1-A - Manual (Page 46)

38
controller is never connected to a PC, then old records will be automatically
overwritten when storage space is full (16,000 events max.).
Under the System Setting Menu, press ENT at the window below to erase all events.
LCD will prompt the user to confirm the action:
Pressing ENT will result in all events being permanently erased.
Reset All Data and Settings
This function is used to reset all settings to factory set default values.
Under the System Setting Menu, press ENT at the window below to reset all settings.
The LCD will prompt the user to confirm the action. Press ENT to confirm and
perform the reset action.
Card Setting
Card setting can be configured using either the controller or the EverAccess Flex
Series software. Using the Flex Series software is the easiest way to enroll cards,
however, enrolling at the controller can be useful if the controller is offline. The
process is described below.
Enter Card Setting Menu
Under the System Menu, press once to bring up the following window:
Press ENT to enter the Card Setting menu. Use and to choose from
different menu options. All menu options under the Card Setting menu are
introduced below:
Erase All Events
Are You Sure ?
[ENT] to Confirm
Reset All Data
& Settings
Card Setting