Emerson Autochangeover Controllers AC8 - Manual (Page 110)

Setup Menu
102
A.6.7 Setup System Info
This section presents Service Terminal Interface screens for choices 1 through 9 in the Setup System
Information menu shown below. For details on this topic, see 7.9 - Setup System - Setup System
Info.
Change Password
For details on this feature, see 7.9.1 - Change Password.
Setup System Info
SETUP SYSTEM INFORMATION
1=CHANGE PASSWORD
2=SET DATE & TIME
3=SETUP SITE ID
4=CONNECT BATTERY
5=BACKUP & UPLOAD CONFIGURATION FILE
6=SETUP SERVICE PHONE NUMBER
7=SET PANEL TO FACTORY DEFAULTS
8=PERFORM FIRMWARE UPDATE
9=INITIATE REMOTE ALARM TEST
0=RETURN TO SETUP MENU
I=RETURN TO MAIN MENU
SELECT A NUMBER:
Change Password
CHANGE PASSWORD
1=CHANGE PASSWORD
2=RETURN TO SETUP SYSTEM INFO MENU
3=RETURN TO SETUP MENU
4=RETURN TO MAIN MENU
SELECT A NUMBER:1
>ENTER ORIGINAL PASSWORD(MUST BE 4 CHARACTERS).
>[****]
>ENTER NEW PASSWORD(MUST BE 4 CHARACTERS).
>[****]
>ENTER NEW PASSWORD AGAIN FOR CONFIRMATION.
>[****]
>PASSWORD CHANGE SUCCESSFUL