Emerson Autochangeover Controllers AC8 - Manual (Page 97)

View Status Menus
89
A.4.5 View Input Status
For details on this feature, see 5.5 - View Input Status.
A.4.6 View Output Status
For details on this feature, see 5.6 - View Output Status.
View Input & Sensor Status
INPUT & SENSOR STATUS
Sensor values & discrete inputs status
INPUT STATUS
SENSOR_1 80.0 DEG
SENSOR_2 ------ DEG
SENSOR_3 80.0 DEG
SENSOR_4 79.5 RH
DEVICE_1 NORMAL
DEVICE_2 ALARM
DEVICE_3 EVENT
DEVICE_4 ALARM
DEVICE_5 ALARM
DEVICE_6 EVENT
DEVICE_7 NORMAL
DEVICE_8 NORMAL
<ENTER>=MORE <ESC>=EXIT <A>=ALL
1=VIEW SENSOR_1 DYNAMICALLY
2=VIEW SENSOR_2 DYNAMICALLY
3=VIEW SENSOR_3 DYNAMICALLY
4=VIEW SENSOR_4 DYNAMICALLY
5=REFRESH INPUT & SENSOR STATUS
6=RETURN TO MAIN MENU
SELECT A NUMBER:1
VIEW SENSOR_1 DYNAMICALLY
SENSOR_1 80.0 DEG
PRESS <ESC> KEY TO EXIT
View Output Status
OUTPUT STATUS
Output status to device
OUTPUT STATE MODE ZONE *****************************************
OPERATING
= OPERATING/ON
DEVICE_1 ON OPERATING 1 STANDBY = IN STANDBY MODE
DEVICE_2 ON OPERATING 1 ALARM = IN ALARM
DEVICE_3 ON OPERATING 1 FORCE ON = FORCE ON BY OPERATOR
DEVICE_4 OFF STANDBY 1 FORCE OFF = FORCE OFF BY OPERATOR
DEVICE_5 OFF NOT USED 0 HW FORCE ON = FORCE ON BY HARDWARE SWITCH
DEVICE_6 OFF NOT USED 0 PENDING = PENDING DELAY TIMER
DEVICE_7 OFF NOT USED 0 NOT USED = DEVICE NOT USED
DEVICE_8 OFF NOT USED 0 *****************************************
1=REFRESH OUTPUT STATUS
2=RETURN TO MAIN MENU
SELECT A NUMBER: