Emerson Autochangeover Controllers AC8 - Manual (Page 58)

System and Control Options
50
International Dialing
7. To enable international dialing involving countries that do not support country code B5 (see
Table 22), you must add the appropriate country codes to the initialization string using the
format:
+GCI=xx
where xx is the country code.
(This also requires the modem model MT5600SMI; the model number can be found on the modem
label.)
Note: For countries that support B5, there is no need to add country codes to the init string.
Edit the Init String
8. To enter or edit the Init String:
• Use the arrows ↑↓ to choose a character.
• Press Enter ↵ to advance to the next character position.
• When finished, press Enter ↵ again.
Table 22 Country codes
Country Code* Country Code* Country Code* Country Code*
Argentina 07 Finland FD Italy FD Philippines B5
Australia 09 France FD Japan 00 Portugal FD
Austria FD Germany FD Korea B5 Slovak Republic FD
Belgium FD Greece FD Liechtenstein FD Spain FD
Canada B5 Hong Kong 99 Luxembourg FD Sweden FD
China B5 Hungary FD Mexico B5 Switzerland FD
Cyprus FD Iceland FD Netherlands FD Taiwan FE
Czech Republic FD Indonesia 99 New Zealand 7E United Kingdom FD
Denmark FD Ireland FD Norway FD United States B5
* B5 is the default setting—initialization string +GCI=xx is not needed for these countries