Emerson Autochangeover Controllers AC8 - Manual (Page 124)

Setup Menu
116
A.6.11 Setup I/O Matrix
For details on this feature, see 7.11 - Setup System - Setup I/O Matrix.
Setup I-O Matrix - Map Input to Control Relay Setup I-O Matrix - Map Sensor to Control Relay
SETUP I/O MATRIX
Program input & sensors
to control relays
Select to map inputs or sensors
1=MAP INPUT TO CONTROL RELAY
2=MAP SENSOR TO CONTROL RELAY
3=RETURN TO SETUP MENU
4=RETURN TO MAIN MENU
SELECT A NUMBER:1
SETUP I/O MATRIX
Program input & sensors
to control relays
Select to map inputs or sensors
1=MAP INPUT TO CONTROL RELAY
2=MAP SENSOR TO CONTROL RELAY
3=RETURN TO SETUP MENU
4=RETURN TO MAIN MENU
SELECT A NUMBER:1
MAP INPUT TO CONTROL RELAY
Program input
to control relays
Select input to map
INPUT CONTROL RELAY
1 2
1=DEVICE_1 N N
2=DEVICE_2 N N
3=DEVICE_3 N N
4=DEVICE_4 N N
5=DEVICE_5 N N
6=DEVICE_6 N N
7=DEVICE_7 N N
8=DEVICE_8 N N
0=RETURN TO SETUP I/O MATRIX
I=RETURN TO SETUP MENU
SELECT A NUMBER:1
MAP SENSOR TO CONTROL RELAY
Program sensor
to control relays
Select sensor to map
SENSOR CONTROL RELAY
1 2
1=SENSOR_1 HIGH STPT N N
2=SENSOR_1 LOW STPT N N
3=SENSOR_2 HIGH STPT N N
4=SENSOR_2 LOW STPT N N
5=SENSOR_3 HIGH STPT N N
6=SENSOR_3 LOW STPT N N
7=SENSOR_4 HIGH STPT N N
8=SENSOR_4 LOW STPT N N
9=RETURN TO SETUP I/O MATRIX
0=RETURN TO SETUP MENU
SELECT A NUMBER:1
>MAP DEVICE_1 TO RELAY 1-YES(Y) OR NO(N)?
>[Y]
>[
>COMMAND SUCCESSFUL
>MAP DEVICE_1 TO RELAY 2-YES(Y) OR NO(N)?
>[N]
>[
>COMMAND SUCCESSFUL
>MAP SENSOR_1 HIGH STPT TO RELAY 1-YES(Y) OR NO(N)?
>[N]
>[
>COMMAND SUCCESSFUL
>MAP SENSOR_1 HIGH STPT TO RELAY 2-YES(Y) OR NO(N)?
>[N]
>[
>COMMAND SUCCESSFUL