Honeywell NXL - Manual (Page 2)

AT LEAST THE 11 FOLLOWING STEPS OF THE START-UP QUICK GUIDE MUST BE PERFORMED
DURING THE INSTALLATION AND COMMISSIONING.
IF ANY PROBLEMS OCCUR, PLEASE CONTACT YOUR LOCAL DISTRIBUTOR.
Start-up Quick Guide
1. Check that the delivery corresponds to your order, see Chapter 3.
2. Before taking any commissioning actions read carefully the safety instructions in Chapter
1.
3. Before the mechanical installation, check the minimum clearances around the unit and
check the ambient conditions in Chapter 5.
4. Check the size of the motor cable, mains cable, mains fuses and check the cable
connections, read Chapter 6.
5. Follow the installation instructions, see Chapter 5.
6. Control cable sizes and the grounding system are explained in Chapter 6.1.1.
7. Instructions on using the keypad are given in Chapter 7.
8. All parameters have factory default values. In order to ensure proper operation, check
the rating plate data for the values below and the corresponding parameters of
parameter group P2.1. See Chapter 8.3.3. In all cases Honeywell NXL start up wizard is
recommended to ensure easy commissioning.
• nominal speed of the motor, par 2.1.7 (2.1.8 in NXL Compact)
• nominal current of the motor, par. 2.1.6 (2.1.9 in NXL Compact)
The following motor parameters need adjusting only if the motor voltage is different from
400 V or the equipment is installed to a electrical network which does not have the
frequency of 50 Hz (e.g. North America 60 Hz).
•
nominal voltage of the motor, par. 2.1.11 (2.1.6 in NXL Compact)
• nominal frequency of the motor, par. 2.1.12 (2.1.7 in NXL Compact)
All parameters are explained in the Application Manuals.
9. Follow the commissioning instructions, see Chapter 8.
10. The Honeywell NXL Frequency Converter is now ready for use.
11. In the end of this manual, you will find a quick help with the default I/O, control panel
menus, monitoring values, fault codes and basic parameters
Honeywell is not responsible for the use of the frequency converters
against the instructions.