Honeywell EXCEL 10 W7752D - Manual (Page 27)

EXCEL 10 FCU CONTROLLER LNS PLUG-INS USER GUIDE
EN2B-0285GE51 R0909 25
Step 6. Configure Controllers
General
This section will provide details on the configuration options
for Excel 10 FCU Controllers. See Appendix C for reference
information.
Using Plug-Ins
The configuration process is primarily performed in a series of
screens seen as file tabs under the menu option Application
Selection and is easily followed using the tables included in
this section. There are 9 file tabs:
1. Output
2. Input
3. Equipment Control
4. Fan
5. Switching Levels
6. Zone Options
7. Miscellaneous
8. PID
9. Wiring (information only, no configuring).
The specific parameters to be configured in each of these four
categories are tabulated in the following subsections. For a
complete list of all Excel 10 FCU Controller NV's, see
Appendix C.