HP 2500C Series - Manual (Page 101)

Loading Paper and Paper Behavior 3-7
Loading Paper through the Rear Manual Feed
1. Set your driver to pick paper from Tray 1 and print your document (i.e. send the print
job to the printer).
2. After sending the print job, the LCD Panel will display the message " MNL FEED
LOAD [ TYPE ] [ SIZE ] " where [ TYPE ] and [ SIZE ] is the media type and size as
specified in your printer driver respectively.
3. Insert the paper media into the Rear Manual Feed at the back of the printer, making
sure that the edge of the sheet is aligned with the alignment mark on the left side of
the slot. Wait for the printer to grip the media before releasing it.