Replacement of parts – HP 2500C Series User Manual
Page 190
Advertising
Removal and Replacement of Parts (without Calibration)
7-40
Replacement of Parts
Installing the Encoder Strip
Step 1. Slide a new encoder strip through the carriage.
Step 2. Latch the encoder strip on both ends. Be careful not to touch the middle portion of the strip.
Step 3. Slot the cover back to place. Make sure it is properly secured.
Step 4. Replace the remaining components for the Paper Knob (refer to the procedures in Installing the
Paper Knob from Replacement of Paper Knob).
Advertising