HP 2500C Series - Manual (Page 174)

Removal and Replacement of Parts (without Calibration) 7-24
Replacement of Parts
Replacement of Ink Supply Station
You will be removing the ink supply station from the printer and installing a new ink supply station.
Removing the Ink Supply Station
Step 1. Follow Steps 1-9 of Removing the
Power Knob from Replacement of
Power Knob.
Step 2. Locate the three screws securing the ink
supply station and unscrew them. Two
of the screws are at the top right of the
ink supply station. The third one is at the
base of the ink supply station which
require long screw driver to unscrew.
Set them aside.
Step 3. Remove the ink delivery system by lifting
the unit up and folding towards the right.