HP 2500C Series - Manual (Page 138)

Functional Overview 6-18
Paper Paths and Components
Swivel PCA
Description
The intend to have a swivel PCA is to allow the trough of the printer to be removed in the
event of paper jammed in the paper path of the printer which the user are not able to
clear it from the front of the printer. This design will clear the back of the printer for the
user to removed any media that are jammed inside the printer ( For details on removable
trough, refer to Replacement of Paper Trough (Chapter 9))
The PCA will always be in the upright position, as shown in figure A . When there is a
paper jam and need to remove the media from the back of the printer, then the user will
need to unlock the locking lever and lower the PCA. The PCA will swing down 90
°
and
lie flat as shown in figure B.
Figure A Figure B
CARRIAGE
CHASSIS
PRINTER
RIGHT
SUPPORT
DUAL BIN
STRUCTURE
PCA MODULE
LOCKING
BRACKET
PCA MODULE
ROTATE 90 °