Replacement of parts – HP 2500C Series User Manual
Page 157
Advertising
Removal and Replacement of Parts (without Calibration)
7-7
Replacement of Parts
Replacement of Service Station
You will be removing the Service Station from the printer and installing a new Service Station.
Removing the Service Station
Step 1. Remove the printhead access cover by
opening the ink cartridge door and tilting
the access cover to the side.
Step 2. Lift the two latches on both the right top
and left top corners of the rear access door
to unlatch it.
Step 3. Remove the service station side cover by
unscrewing the two screws securing it and
lifting it up.
Advertising