Replacement of parts – HP 2500C Series User Manual
Page 177
Advertising
Removal and Replacement of Parts (without Calibration) 7-27
Replacement of Parts
Replacement of Main Case
You will be removing the main case from the printer and installing a new main case.
Removing the Main Case
Step 1. Follow Steps 1-9 of Removing the Power
Knob from Replacement of Power Knob.
Step 2. Disconnect the LCD and LED connectors.
Step 3. Unscrew the two screws at the top of the
main case and set them aside.
Step 4. Pull out the paper knob a little and lift up
the main case.
Advertising