Replacement of parts – HP 2500C Series User Manual
Page 186
Advertising
Removal and Replacement of Parts (without Calibration)
7-36
Replacement of Parts
Installing the Assembly Harness Cover
Step 1. Latch the hinges of the assembly harness cover first.
Step 2. Push in both flaps of the assembly harness cover. Make sure the cover is secured properly.
Step 3. Reattach the springs on both sides of the rear door.
Step 4. Close the rear door.
Step 5. Replace the remaining components for the Main Case (refer to the procedures in Installing the
Main Case from Replacement of Main Case).
Advertising