Replacement of parts – HP 2500C Series User Manual
Page 165
Removal and Replacement of Parts (without Calibration) 7-15
Replacement of Parts
Installing the LCD Panel
Step 1. Install the new LCD panel by fitting it in from the bottom first before pushing it down till it snaps into
place. Make sure the plastic holders secure the LCD panel properly.
Step 2. Latch the wiring back in the plastic hooks neatly.
Step 3. Reinstall the LCD harness and replace the screw securing it.
Step 4. Reconnect both the LCD and LED connectors. Make sure the connectors are correctly secured.
Caution!
Please note that the colors of the wiring of the LCD connector are different from that of the LED
connector. When connecting, please check that the sequences of the colors of the connectors match on
both ends.
Step 5. Replace the remaining components for the LED PCA (refer to the procedures in Installing the LED
PCA from Replacement of LED PCA).