HP 2500C Series - Manual (Page 76)

Operating Overview 2-18
Using the Control Panel
MIO Menu
This menu is available only if the MIO card is installed. It is controlled by the MIO print
server which has been installed on the printer and thus varies accordingly. Please refer to
the documentation that comes with the print server for more information.
PostScript Menu (for HP 2500CM printer or with PostScript Upgrade
Kit installed only)
Item Value Explanation
PRINT PS ERRORS=
OFF OFF
ON Select ON to print the PS error page
when a PS error occurs.
JAM RECOVERY=
AUTO AUTO
ON
OFF Determines how the printer behaves
when a paper jam occurs.
AUTO: The printer automatically selects
the best mode for printer jam recovery
(usually ON). This is the default setting.
ON: The printer automatically reprints
pages after a paper jam is cleared.
OFF: The printer does not reprint pages
following a paper jam. Printing
performance might be increased with this
setting.
COPIES=1 1 to 99 Sets the default number of copies by
selecting any number from 1 to 99.
Press [ Value ] once to change the setting
by increments of 1 or hold down
[ Value ] to scroll through the settings.