HP 2500C Series - Manual (Page 172)

Removal and Replacement of Parts (without Calibration) 7-22
Replacement of Parts
Replacement of Modular Ink Delivery System (MIDS)
You will be removing the Modular Ink Delivery System (MIDS) from the printer and installing a new MIDS.
Removing the MIDS
Step 1. Follow Steps 1-9 of Removing the
Power Knob from Replacement of
Power Knob.
Step 2. Remove both screws from the ink supply
station, then remove the pump section.
Step 3. Detach the MIDS by removing the
retainer clip from the carriage assembly
and the center screw between the letters
C and M on the print carriage. Keep the
retainer clip aside as it will be used when
the new MIDS is installed.