Replacement of parts – HP 2500C Series User Manual
Page 187
Advertising
Removal and Replacement of Parts (without Calibration) 7-37
Replacement of Parts
Replacement of Rear Door
You will be removing the rear door from the printer and installing a new rear door.
Removing the Rear Door
Step 1. Remove the Assembly Harness Cover
(refer to the procedures in Removing the
Assembly Harness Cover from
Replacement of Assembly Harness
Cover).
Step 2. Remove the four screws connecting the rear
door to the main panel and set them aside.
Step 3. Detach the rear door from the printer.
Advertising