Honeywell MK VI - Manual (Page 126)

Honeywell
MK VI MK VIII EGPWS Installation Design Guide
Proprietary notice on title page applies
CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-150 REV: SHEET 126
a) “SYSTEM CONFIGURATION”
b) “PART NUMBER 965-11X0-XXX”
c) “MOD STATUS XX”
d) “SERIAL NUMBER XXXX”
e) “APPLICATION SOFTWARE VERSION XXXXX”
f) “TERRAIN DATABASE VERSION XXXX”
The following example of Terrain Database Version annunciation: “419A” (for ATLANTIC),
“419P” (for PACIFIC), or “419N” (for AMERICAS). Other versions will follow the same pattern
(e.g. “421P”).
(7) Other messages that follow the Terrain Database Version can be ignored. When ST Level 3 finishes,
the message “Press to Continue” is heard. If the ST button is not pressed again the ST sequence
terminates.
NOTE: If power was connected to the EGPWC per steps B1 through B4, perform shut-down per steps (7) and
(8) following.
(8) Turn Power Supply OFF.
(9) Disconnect Power leads from the EGPWC.
END OF TEST