Honeywell MK VI - Manual (Page 34)

Honeywell
MK VI MK VIII EGPWS Installation Design Guide
Proprietary notice on title page applies
CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-150 REV: SHEET 34
STEP 2 Wire item 2.0 (Configuration Module). This part will replace item 1.4 (Backshell plate). Install
the pre-crimped colored wires into item 1.1 (Connector) as shown in figure 2.1-2 below.
FIGURE 2.1-2 MK VI/MK VIII EGPWS CONFIGURATION MODULE