Certification, Introduction, Certification procedure – Honeywell MK VI User Manual
Page 128: Equipment compatibility, Equipment location, Faa requirements, Ground test, Flight manual revision, Flight test
Honeywell
MK VI MK VIII EGPWS Installation Design Guide
Proprietary notice on title page applies
CAGE CODE: 97896
SCALE: NONE
SIZE: A
DWG NO: 060-4314-150
REV:
SHEET
128
SECTION V – CERTIFICATION
5.1 Introductio n
This section outlines the procedures required to obtain FAA approval for the MK VI/MK VIII EGPWS installation.
Recommended flight test procedures are also included.
5.2 Certificatio n Procedure
5.2.1 Equipment Compatibility
Careful consideration must be paid to the electrical characteristics of existing equipment or possible additions
that will be interfaced to the MK VI/MK VIII EGPWS, in order to ensure system compatibility. Section III of this
manual provides system planning guidelines, and defines the electrical characteristics of the EGPWS. The
installing agency should contact Honeywell Product Support (800-813-2099), for information regarding the
compatibility of equipment not listed in Section III. Normal business hours are 8:00 AM to 5:00 PM Pacific Time,
Monday through Friday.
5.2.2 Equipment Location
The EGPWS and associated indicators, annunciators, and switches should be clearly visible and within easy
reach of the pilot(s). Refer to Section II of this manual for complete installation information.
5.2.3 FAA Requir ements
The installing agency should contact a local FAA Inspector who will determine whether the installation may be
approved by Supplemental Type Certificate (STC) or by submitting FAA Form 337 with an applicable STC
package.
5.2.4 Ground Tes t
Honeywell has developed a generic Installation Ground Test Procedure for the MK VI/MK VIII EGPWS, drawing
number 060-4167-158.
5.2.5 Flight Manu al Revision
Honeywell has developed a generic Airplane Flight Manual Supplement for the MK VI/MK VIII EGPWS, drawing
number 060-4199-194.
5.2.6 Flight Test
Honeywell has developed a generic Flight Test procedure for the MK VI/MK VIII EGPWS (GA-Fast and GA-
Slow aircraft), drawing number 060-4188-041. A separate generic Flight Test procedure has been developed for
MK VIII EGPWS Bizjet aircraft, drawing number 060-4188-023. The Flight Test procedures were developed for