Honeywell MK VI - Manual (Page 161)

Honeywell
MK VI MK VIII EGPWS Installation Design Guide
Proprietary notice on title page applies
CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-150 REV: SHEET 161
3.2.3 Configuration Module
The EGPWS aircraft configuration is programmed into a configuration module installed in the aircraft wiring. This
configuration module is identified as follows:
Vendor/Supplier
Supplier P/N
Honeywell 700-1710-001
Honeywell 700-1710-020 *
The configuration module is installed as part of the P2 mating connector backshell and contains reprogrammable memory
for configuration storage.
Configuration module part number 700-1710-020, contains a Real Time Clock (RTC) circuit that supplies the EGPWS
with date and time to allow the internal GPS receiver to determine GPS constellation shift and provide faster satellite
signalacquistion and navigation. The Configuration module, part number 700-1710-020, will only operate with EGPWC
hardware part numbers 965-1180, 965-1190, 965-1210, 965-1220 and software versions -020 or later.
Configuration module, part number 700-1710-001, can be used with all EGPWC hardware part numbers and software
versions.