Category 9, navigation input select – Honeywell MK VI User Manual

Page 248

Advertising
background image

Honeywell

MK VI MK VIII EGPWS Installation Design Guide

Proprietary notice on title page applies

CAGE CODE: 97896

SCALE: NONE

SIZE: A

DWG NO: 060-4314-150

REV:

SHEET

248

5.3.9 Category 9, Navigation Input Select

The following table provides identification of the Navigation type. The entry in the Navigation Type corresponds to a
table that provides detailed information on the configuration. For example, the details for Navigation Type #1 are found
in Table 5.3.9-1. In this category, only the following signals are defined:

Glideslope source selection.

Localizer source selection.

PFD Mode Select Word

Selected Course

Note: Numerous (but not all) Envelope Modulation cases require a localizer input. Therefore, a NAV ID

that supplies both Glideslope and Localizer should be selected in this category, if possible.
However, due to hardware limitations, use of Localizer for installations that can only provide low
level GS validity is not supported. In these cases, only ID #1 can be selected. Envelope
Modulation will still function for those locations which do not require a Localizer input, but not
for those that require Localizer.

TABLE 5.3.9: NAVIGATION INPUT SELECT

ID

Navigation

Inputs Select

Description

Software

Effectivity

EGPWS

Effectivity

(Table 5.3.9-x)

MKVI

MK VIII

0

0

Analog Glideslope (ARINC 547) with +28V Validity
Flag

-020

X

X

1

1

Analog Glideslope (ARINC 547) with Low Level
Validity

-020

X

X

2

2

Digital Glideslope (ARINC 429)

-020

X

X

3

3

Digital Glideslope and Localizer (ARINC 429)

-020

X

X

4

4

Digital KN40 Glideslope and Localizer (ARINC 429)

-020

X

X

5

5

Analog Glideslope/Localizer (ARINC 547) with
+28V Validity Flag

-020

X

X

250

250

Digital Glideslope, Localizer, PFD Word and Selected
Course (ARINC 429 via dual IOC buses) (Note 1)

-020

N/A

X

251

251

Digital Glideslope, Localizer and Selected Course
(ARINC 429 via dual IOC buses) (Note 2)

-020

N/A

X

252

252

Digital Glideslope and Localizer – Alternate Input
Channels (ARINC 429 via dual IOC buses) (Note 2)

-020

N/A

X

253

253

Digital Glideslope and Localizer (ARINC 429 via
dual IOC buses) (Note 2)

-020

N/A

X

254

254

Digital Glideslope, Localizer and PFD Word (ARINC
429 via dual IOC buses) (Note 1)

-020

N/A

X

255

255

Digital Glideslope and Localizer – Alternate Labels
(ARINC 429 via dual IOC buses) (Note 2)

-020

N/A

X

Note 1: ID 250 and 254 may only be used in conjunction with other IOC bus selections for categories 2,6,8,10,11 and 12.

The use of either the left or right source is based on the displayed source provided on label 163.

Note 2: ID 251, 252, 253, and 255 may only be used in conjunction with other IOC bus selections for categories

2,6,8,10,11 and 12.

Advertising
This manual is related to the following products: