Honeywell MK VI - Manual (Page 56)

Honeywell
MK VI MK VIII EGPWS Installation Design Guide
Proprietary notice on title page applies
CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-150 REV: SHEET 56
3.3.7 Runway Le ngth (MK VIII EGPWS only)
Two minimum runway length options are defined for Bizjet (Turbofan) aircraft. A 2000 ft minimum runway length
or a 3500 ft minimum runway length may be chosen based on aircraft type as is identified in Appendix E Table
5.3.1. This option does not effect the mode curves as discussed above, and it is only available on MK VIII
EGPWS.
3.3.8 Instruction s
Using Appendix E Tables 5.2 and 5.3.1 as described above, select the Aircraft/Mode Type that
matches the aircraft configuration, feature preferences and version (part number) being installed.
Step 1: Is the aircraft a turbofan? YES, goto Step 2.
NO, goto Step 3.
Step 2: Aircraft can operate from runways less than 3500’? YES, use ID 255
NO, use ID 254
Step 3: Landing speed is typically > 120 knots? YES, goto Step 4.
NO, goto Step 5.
Step 4: 200’ / 170’ / 150’ Flap alert preferred? 200’ use ID 2
170’ use ID 0
150’ use ID 1
Step 5: 170’ / 150’ Flap alert preferred? 170’ use ID 3
150’ use ID 4
Record the ID number for the Aircraft/Mode Type from Appendix E Table 5.3.1 under the Ident No.
heading for Step (Category) 1 in Appendix E Table 5.2.