Document Outline

• 1.1 AUDIENCE
• 1.2 MANUAL ORGANIZATION
• 1.3 TERMINOLOGY AND CONVENTIONS
• 1.4 REFERENCES
• 2.1 PRODUCT OVERVIEW
• 2.2 KEY FEATURES
• 2.3 Regulatory Compliance Standards
• 2.4 HARDWARE REQUIREMENTS
• 3.1 SAFETY, HANDLING, & ELECTROSTATIC DISCHARGE PROTECTION
  • 3.1.1 Safety Precautions
  • 3.1.2 Handling
  • 3.1.3 Electrostatic Discharge (ESD) Protection
• 3.2 SPACE REQUIREMENTS
  • Figure 3-1 Dimensions for the Maxtor Atlas 10K III Hard Disk Drives
  • 3.2.1 Shock Feet
• 3.3 UNPACKING INSTRUCTIONS
  • Figure 3-2 Drive Packing Assembly
• 3.4 HARDWARE OPTIONS
  • 3.4.1 Configuration Jumpers and Connections
  • 3.4.2 Jumper Options on the 68-Pin Wide PCB
    • Figure 3-3 Jumper Locations on the 68-Pin Wide SCSI Drive PCB
    • Table 3-1 SCSI ID Selection on Option Connector (68-Pin SCSI Connector Drives)
    • Figure 3-4 Termination Power Circuitry
  • 3.4.3 SCA-2 80-Pin Connector Versions
    • Figure 3-5 Pin Locations on SCA-2 Connector
    • Table 3-2 SCSI ID Pin Assignments (SCA-2 Connector Versions of the Disk Drive)
    • Table 3-3 Spin Up on Power On Options
  • 3.4.4 Jumper J7 on the 80-Pin SCA PCB
    • Figure 3-6 J7 Jumper Location on the 80-Pin SCA PCB
• 3.5 INTERFACE CONNECTOR (J1)
  • Figure 3-7 J1 Interface Connector Configurations
  • 3.5.1 68-pin Wide SCSI Connector - LVD
    • Table 3-4 68-Pin Wide LVD Pin Assignments
  • 3.5.2 80-pin SCA-2 SCSI Connector - LVD
    • Table 3-5 80-Pin SCA-2 LVD Pin Assignments
  • 3.5.3 68-Pin Wide Single-Ended SCSI Connector
    • Table 3-6 68-Pin Wide Single-Ended Pin Assignments
  • 3.5.4 80-pin SCA-2 Single-Ended SCSI Connector
    • Table 3-7 80-Pin SCA-2 Single-Ended Pin Assignments
• 3.6 4-pin DC Power Connector (68-Pin Connector)
  • Table 3-8 Power Connector (J1, Section A)
• 3.7 4-pin Mating Connector
• 3.8 J1 12-pin Auxiliary Connector (68-pin Connector)
  • Table 3-9 J1 Auxiliary 12-Pin Connector
• 3.9 DRIVE MOUNTING and installation
  • 3.9.1 Orientation
    • Figure 3-8 Mounting Dimensions Maxtor Atlas 10K III Drives
  • 3.9.2 Mounting Screw Clearance
    • Figure 3-9 Mounting Screw Clearance for Maxtor Atlas 10K III Drive
  • 3.9.3 Shock Clip
  • 3.9.4 Mounting
  • 3.9.5 Ventilation
    • Figure 3-10 Lengthwise Airflow Cooling
    • Figure 3-11 Crosswise Airflow Cooling
• 4.1 SPECIFICATION SUMMARY
  • Table 4-1 Specifications
• 4.2 FORMATTED CAPACITY
  • Table 4-2 Formatted Capacity
• 4.3 DATA TRANSFER RATES
• 4.4 TIMING SPECIFICATIONS
  • Table 4-3 Timing Specifications for Maxtor Atlas 10K III
• 4.5 POWER
  • 4.5.1 Power Sequencing
  • 4.5.2 Power Reset Limits
    • Table 4-4 Power Reset Limits1
  • 4.5.3 Drive Power Dissipation
    • Table 4-5 Power Dissipation in Various Modes (Low-Profile Drives)
• 4.6 ACOUSTICS
  • Table 4-6 Acoustical Characteristics—Sound Power per ISO 7779
  • 4.6.1 Acoustic Tonal Quality
• 4.7 MECHANICAL
• 4.8 ENVIRONMENTAL CONDITIONS
  • Table 4-7 Environmental Specifications
• 4.9 ELECTROMAGNETIC CONDITIONS
  • 4.9.1 EMI/RFI Susceptibility
  • 4.9.2 Sensitivity to Magnetic Fields
• 4.10 SHOCK AND VIBRATION
  • Table 4-8 Shock and Vibration Specifications
• 4.11 RELIABILITY
• 4.12 DISK ERRORS
  • Table 4-9 Error Rates
• 5.1 Overview of the SCSI Command Descriptions
  • Table 5-1 Supported SCSI Commands
• 5.2 Command Descriptor Block
  • Table 5-2 Typical (6-Byte) Command Descriptor Block-Data Format
  • Table 5-3 Command Descriptor Block-Field Descriptions
  • Table 5-4 Typical (6-Byte) Command Descriptor Block — Data Format
  • Table 5-5 Command Descriptor Block Control Field-Field Descriptions
• 5.3 Status/Error Reporting
  • Table 5-6 Status Codes
• 5.4 Auto Contingent Allegiance Condition and Contingent Allegiance Condition
• 5.5 Extended Contingent Allegiance Condition
• 5.6 Linked Commands
• 5.7 DATA Transfer Command Components
  • Table 5-7 Length Fields
  • Table 5-8 DATA-Phase Command Contents
• 5.8 SCSI COMMAND DESCRIPTIONS
• 5.9 CHANGE DEFINITION Command (40h)
  • Table 5-9 CHANGE DEFINITION Command Descriptor Block-Data Format
  • Table 5-10 CHANGE DEFINITION-Field Descriptions
• 5.10 FORMAT UNIT Command (04h)
  • Table 5-11 FORMAT UNIT Command Descriptor Block-Data Format
  • Table 5-12 FORMAT UNIT Command-Field Descriptions
  • 5.10.1 Five Forms of FORMAT UNIT Command s
    • Table 5-13 FORMAT UNIT Command Supported Options
  • 5.10.2 FORMAT UNIT Parameter List
    • Table 5-14 FORMAT UNIT Parameter List-Data Format
    • Table 5-15 .FORMAT UNIT Defect List Header-Data Format
    • Table 5-16 FORMAT UNIT Defect List Header-Field Descriptions
    • Table 5-17 FORMAT UNIT Defect Descriptor-Block Format
    • Table 5-18 FORMAT UNIT Defect Descriptor- Physical Sector and Bytes From Index Format
    • Table 5-19 FORMAT UNIT Initialization Pattern Descriptor-Data Format
    • Table 5-20 FORMAT UNIT Initialization Pattern Descriptor-Field Descriptions
    • Table 5-21 FORMAT UNIT Initialization Pattern Type
• 5.11 INQUIRY Command (12h)
  • Table 5-22 INQUIRY Command Descriptor Block-Data Format
  • Table 5-23 INQUIRY Command Descriptor Block-Field Descriptions
  • 5.11.1 Standard Inquiry Data Page
    • Table 5-24 Standard Inquiry Data Page-Data Format
    • Table 5-25 Standard Inquir Data Page-Field Descriptions
  • 5.11.2 Vital Product Data Pages
    • Table 5-26 Supported Vital Product Data Pages -Data Format
    • Table 5-27 Vital Product Data-Page Codes
    • Table 5-28 Unit Serial Number Page-Data Format
    • Table 5-29 Unit Serial Number Page-Field Descriptions
    • Table 5-30 Implemented Operating Definition Page-Data Format
    • Table 5-31 Implemented Operating Definition Page-Field Descriptions
    • Table 5-32 ASCII Implemented Operating Definition Page - Data Format
    • Table 5-33 Device Identification Page - Data Format
    • Table 5-34 Device Identification Page-Field Description
    • Table 5-35 Firmware Revision Page -Data Format
    • Table 5-36 Maxtor Manufacturing Information Page-Data Format
    • Table 5-37 Negotiated Rate Information Page-Data Format
    • Table 5-38 Negotiated Rate Information Page-Field Descriptions
    • Table 5-39 Command Support Data Page-Data Format
    • Table 5-40 Command Support Data Page-Field Descriptions
    • Table 5-41 Command Support Data Page Command or Operation Codes
• 5.12 LOG SELECT Command (4Ch)
  • Table 5-42 LOG SELECT Command Descriptor Block-Data Format
  • Table 5-43 LOG SELECT Command Descriptor Block-Field Descriptions
• 5.13 LOG SENSE Command (4Dh)
  • Table 5-44 Disk Drive Log Pages
  • 5.13.1 LOG SENSE Command Descriptor Block
    • Table 5-45 LOG SENSE Command Descriptor Block-Data Format
    • Table 5-46 LOG SENSE Command Descriptor Block-Field Descriptions
  • 5.13.2 LOG SENSE Log Pages
    • Table 5-47 LOG SENSE Log Page Format-Data Format
    • Table 5-48 LOG SENSE Log Page Format-Field Descriptions
    • Table 5-49 Generic Log Parameter-Data Format
    • Table 5-50 Generic Log Parameter-Field Descriptions
• 5.14 MODE SELECT (6) Command (15h)
  • Table 5-51 MODE SELECT (6) Command Descriptor Block-Data Format
  • Table 5-52 MODE SELECT (6) Command Field Descriptions
  • 5.14.1 Initiator-Changeable Mode Pages
    • Table 5-53 Initiator-Changeable Mode Pages
  • 5.14.2 Mode Page Types
    • Table 5-54 Mode Page Types
  • 5.14.3 Mode Parameter List
    • Table 5-55 Mode Parameter List-Data Format
    • Table 5-56 Mode Parameter List-Field Descriptions
    • Table 5-57 Mode Parameter Header (6-Byte)-Data Format
    • Table 5-58 Mode Parameter Header- Field Descriptions
    • Table 5-59 Mode Parameter Block Descriptor-Data Format
    • Table 5-60 Mode Parameter Block Descriptor-Field Descriptions
    • Table 5-61 Categories of Changeable Pages
    • Table 5-62 Unit Attention Condition Page (Page 0)
    • Table 5-63 Unit Attention Condition Page (Page 0)
    • Table 5-64 Read-Write Error Recovery Page-(Page 1)
    • Table 5-65 Read-Write Error Recovery Page-(Page 1)
    • Table 5-66 Disconnect–Reconnect Page (Page 2)
    • Table 5-67 Disconnect-Reconnect-Field Descriptions (Page 2)
    • Table 5-68 Verify Error Recovery Page-(Page 7)
    • Table 5-69 Verify Error Recovery Page-Field Descriptions (Page 7)
    • Table 5-70 Caching Page-(Page 8)
    • Table 5-71 Caching Page-(Page 8)
    • Table 5-72 Control Mode Page-(Page 0Ah)
    • Table 5-73 Control Mode Page-Field Descriptions (Page 0Ah)
    • Table 5-74 Notch and Partition Page-(Page 0Ch)
    • Table 5-75 Notch and Partition Page-Field Descriptions (Page 0Ch)
    • Table 5-76 Port Control Page Short Format
    • Table 5-77 Port Control Page Long Format
    • Table 5-78 Power Condition Page-(Page 1Ah)
    • Table 5-79 Power Condition Page-Field Descriptions (Page 1Ah)
    • Table 5-80 Information Exceptions Control Page-(Page 1Ch)
    • Table 5-81 Information Exceptions Control Page-Field Descriptions (Page 1Ch)
    • Table 5-82 Codes Used by the MRIE Field
    • Table 5-83 Maxtor-Unique Page-Data Format (Page 39h)
    • Table 5-84 Maxtor-Unique Page-Field Descriptions (Page 39h)
• 5.15 MODE SELECT (10) Command (55h)
  • Table 5-85 MODE SELECT (10) Command Descriptor Block-Data Format
  • Table 5-86 Mode Parameter Header (10-Byte)-Data Format
  • Table 5-87 Mode Parameter Block Descriptor-Data Format
  • Table 5-88 Mode Parameter Block Descriptor-Field Descriptions
• 5.16 MODE SENSE (6) Command (1Ah)
  • Table 5-89 MODE SENSE (6) Command Descriptor Block-Data Format
  • Table 5-90 MODE SENSE Command-Field Descriptions
  • Table 5-91 Mode Parameter Header (6 Byte)-Data Format
  • Table 5-92 Mode Parameter Header-Field Descriptions
  • 5.16.1 Read-Only Mode Pages
    • Table 5-93 Read-Only Mode Pages
  • 5.16.2 Format Device Page (03h)
    • Table 5-94 Format Device Page-(Page 3)
    • Table 5-95 Format Device Page-Field Descriptions (Page 3)
  • 5.16.3 Rigid Disk Geometry Page (04h)
    • Table 5-96 Rigid Disk Geometry Page-(Page 4)
    • Table 5-97 Rigid Disk Geometry Page-Field Descriptions (Page 4)
  • 5.16.4 Margin Control Subpage
    • Table 5-98 Margin Control Subpage (01h)
  • 5.16.5 Saved Training Configuration Values Subpage
    • Table 5-99 Saved Training Configuration Subpage (02h)
  • 5.16.6 Negotiated Settings Subpage
    • Table 5-100 Negotiated Settings Subpage (03h)
    • Table 5-101 Bus Mode
  • 5.16.7 Maxtor-Unique Caching Page (38h)
    • Table 5-102 Maxtor-Unique Caching Page-(Page 38h)
    • Table 5-103 Maxtor-Unique Caching-Field Description (Page 38h)
• 5.17 MODE SENSE (10) Command (5Ah)
  • Table 5-104 MODE SENSE (10) Command Descriptor Block-Data Format
  • Table 5-105 Mode Parameter Header (10 Byte)-Data Format
  • Table 5-106 Mode Parameter Block Descriptor-Data Format
  • Table 5-107 Mode Parameter Header & Block Descriptor -Field Descriptions
• 5.18 PERSISTENT RESERVATION IN Command (5Eh)
  • Table 5-108 PERSISTENT RESERVATION IN Command Descriptor Block-Data Format
  • Table 5-109 PERSISTENT RESERVATION IN Command-Field Descriptions
  • Table 5-110 Read Keys Parameters-Data Format
  • Table 5-111 Read Keys Parameters-Field Descriptions
  • Table 5-112 Read Reservations Parameters-Data Format
  • Table 5-113 Read Reservations Parameters-Field Descriptions
  • Table 5-114 PERSISTENT RESERVATION IN Read Reservations Descriptor-Data Format
  • Table 5-115 PERSISTENT RESERVATION IN Read Reservations Descriptor-Field Descriptions
  • Table 5-116 Persistent Reservation Type Codes and Their Meanings
  • Table 5-117 When Do Conflicts Between Existing Reservations and New Reservations Exist?
• 5.19 PERSISTENT RESERVATION OUT Command (5Fh)
  • Table 5-118 PERSISTENT RESERVATION OUT Command Descriptor Block-Data Format
  • Table 5-119 PERSISTENT RESERVATION OUT Command-Field Descriptions
  • Table 5-120 PERSISTENT RESERVATION OUT Command’s Service Action Descriptions
  • Table 5-121 Persistent Reservation Type Codes and Their Meanings
  • Table 5-122 .PERSISTENT RESERVATION OUT Parameter List-Data Format
  • Table 5-123 PERSISTENT RESERVATION OUT Parameter List-Field Descriptions
  • Table 5-124 Device Server Interpretation of Service and Scope Value
• 5.20 READ (6) Command (08h)
  • Table 5-125 READ (6) Command-Data Format
  • Table 5-126 READ (6) Command -Field Descriptions
• 5.21 READ (10) Command (28h)
  • Table 5-127 READ (10) Command -Data Format
  • Table 5-128 READ (10) Command -Field Descriptions
• 5.22 READ BUFFER Command (3Ch)
  • Table 5-129 READ BUFFER Command-Data Format
  • Table 5-130 READ BUFFER Command -Field Descriptions
• 5.23 READ CAPACITY Command (25h)
  • Table 5-131 READ CAPACITY Command-Data Format
  • Table 5-132 READ CAPACITY Command -Field Descriptions
  • Table 5-133 READ CAPACITY Returned Data-Data Format
• 5.24 READ DEFECT DATA Command (10) (37h)
  • Table 5-134 READ DEFECT DATA (10) Command -Data Format
  • Table 5-135 READ DEFECT DATA (10) Command -Field DescriptionREAD DEFECT
  • Table 5-136 Defect Descriptor-Block Format.
  • Table 5-137 Defect Descriptor-Bytes From Index Format, or Physical Sector Format
  • Table 5-138 Defect List Header -Data Format
  • Table 5-139 Defect List Header -Field Descriptions
• 5.25 READ DEFECT DATA Command (12) (B7h)
  • Table 5-140 READ DEFECT DATA (12) Command -Data Format
  • Table 5-141 READ DEFECT DATA (12) Command-Field Description
  • Table 5-142 Defect Descriptor-Block Format
  • Table 5-143 Defect Descriptor-Bytes From Index Format, or Physical Sector Format
  • Table 5-144 Defect List Header-Data Format
  • Table 5-145 Defect List Header -Field Descriptions
• 5.26 READ LONG Command (3Eh)
  • Table 5-146 READ LONG Command Descriptor Block-Data Format
  • Table 5-147 READ LONG Command Descriptor Block-Field Descriptions
  • Table 5-148 READ LONG Command -Returned Data
• 5.27 READ SKIP MASK Command (E8h)
  • Table 5-149 READ SKIP MASK Command -Data Format
  • Table 5-150 READ SKIP MASK Command -Field Descriptions
• 5.28 REASSIGN BLOCKS Command (07h)
  • Table 5-151 REASSIGN BLOCKS Command Descriptor Block-Data Format
  • Table 5-152 REASSIGN BLOCKS Defect List Header-Data Format
  • Table 5-153 REASSIGN BLOCKS Defect List Header -Field Description
  • Table 5-154 REASSIGN BLOCKS Defect Descriptor-Data Format
• 5.29 RECEIVE DIAGNOSTIC RESULTS Command (1Ch)
  • Table 5-155 Diagnostic Pages Supported by The Drives
  • Table 5-156 RECEIVE DIAGNOSTIC RESULTS Command Descriptor Block-Data Format
  • Table 5-157 RECEIVE DIAGNOSTIC RESULTS Command Descriptor Block-Field Descriptions
  • 5.29.1 Supported Diagnos
    • Table 5-158 Supported Diagnostics Pages Page-Data Format
  • 5.29.2 Translate Address Page (40h)
    • Table 5-159 Translate Address Page-Data Format
    • Table 5-160 Translate Address Page-Field Descriptions
• 5.30 RELEASE (6) Command (17h)
  • Table 5-161 RELEASE (6) Command Descriptor Block-Data Format
  • Table 5-162 RELEASE (6) Command -Field Descriptions
• 5.31 RELEASE (10) Command (57h)
  • Table 5-163 RELEASE (10) Command Descriptor Block-Data Format
  • Table 5-164 RELEASE (10) Command — Field Descriptions
• 5.32 REPORT DEVICE IDENTIFIER Command (A3h)
  • Table 5-165 REPORT DEVICE IDENTIFIER Command Descriptor Block-Data Format
  • Table 5-166 REPORT DEVICE IDENTIFIER Command Descriptor Block-Field Descriptions
  • Table 5-167 .REPORT DEVICE IDENTIFIER Parameter List-Data Format
  • Table 5-168 REPORT DEVICE IDENTIFIER Parameter List-Field Descriptions
• 5.33 REPORT LUNS Command (A0h)
  • Table 5-169 REPORT LUNS Command Descriptor Block-Data Format
  • Table 5-170 REPORT LUNS Command Descriptor Block-Field Description
  • Table 5-171 LUN Reporting Parameter List -Data Format
• 5.34 REQUEST SENSE Command (03h)
  • Table 5-172 REQUEST SENSE Command Descriptor Block-Data Format
  • Table 5-173 REQUEST SENSE Command Descriptor Block-Field Description
  • 5.34.1 Sense Data Availability
  • 5.34.2 Status Reporting
  • 5.34.3 Sense Data Format for Error Code 70h and Error Code 71h
    • Table 5-174 Sense Data Format for Error Code 70h or 71h-Data Format
    • Table 5-175 Sense Data Fields (Error Code 70h)-Field Descriptions
    • Table 5-176 Supported Sense Key s
    • Table 5-177 Sense Key Information Field Contents
    • Table 5-178 Supported Additional Sense Codes and Sense Code Qualifiers (in Hex)
    • Table 5-179 Sense-Key Specific Field Contents
    • Table 5-180 ILLEGAL REQUEST Sense Key Field Pointer Bytes\Data Format
    • Table 5-181 ILLEGAL REQUEST Sense Key Field Pointer Bytes \Field Descriptions
    • Table 5-182 NOT READY Sense Key - Progress Indication Bytes\Data Format
    • Table 5-183 NOT READY Sense Key - Progress Indication Bytes\Field Descriptions
    • Table 5-184 MEDIUM ERROR or RECOVERED ERROR Sense Key - Retry Count-Data Format
    • Table 5-185 Table 5–90 MEDIUM ERROR or RECOVERED ERROR Sense Key - Retry Count
• 5.35 RESERVE (6) Command (16h)
  • Table 5-186 RESERVE (6) Command Descriptor Block-Data Format
  • Table 5-187 RESERVE (6) Command -Field Descriptions
• 5.36 RESERVE (10) Command (56h)
  • Table 5-188 RESERVE (10) Command Descriptor Block-Data Format
  • Table 5-189 RESERVE (10) Command -Field Descriptions
  • Table 5-190 Extent Descriptors-Data Format
  • Table 5-191 Reservation Types
  • Table 5-192 Parameter List When LongID and Extent Bits = 1-Data Format
  • Table 5-193 RESERVE (10) ID Only Parameter List-Data Format
• 5.37 REZERO UNIT Command (01h)
  • Table 5-194 REZERO UNIT Command Descriptor Block-Data Format
• 5.38 SEEK (6) Command (0Bh)
  • Table 5-195 SEEK (6) Command Descriptor Block-Data Format
• 5.39 SEEK (10) Command (2Bh)
  • Table 5-196 SEEK (10) Command Descriptor Block-Data Format
• 5.40 SEND DIAGNOSTIC Command (1Dh)
  • Table 5-197 SEND DIAGNOSTIC Command Descriptor Block-Data Format
  • Table 5-198 SEND DIAGNOSTIC Command -Field Descriptions
  • 5.40.1 Supported Diagnostic Page List
    • Table 5-199 Supported Diagnostic Page List -Data Format
  • 5.40.2 Translate Address Page
    • Table 5-200 Translate Address Page-Data Format
• 5.41 SET DEVICE IDENTIFIER Command (A4h)
  • Table 5-201 SET DEVICE IDENTIFIER Command Descriptor Block-Data Format
  • Table 5-202 SET DEVICE IDENTIFIER Command Descriptor Block-Field Descriptions
  • Table 5-203 SET DEVICE IDENTIFIER Parameter List-Data Format
  • Table 5-204 SET DEVICE IDENTIFIER Parameter List-Field Descriptions
• 5.42 START STOP UNIT Command (1Bh)
  • Table 5-205 START STOP UNIT Command Descriptor Block-Data Format
  • Table 5-206 START STOP UNIT Command-Field Descriptions
• 5.43 SYNCHRONIZE CACHE Command (35h)
  • Table 5-207 SYNCHRONIZE CACHE Command Descriptor Block-Data Format
  • Table 5-208 SYNCHRONIZE CACHE Command -Field Descriptions
• 5.44 TEST UNIT READY Command (00h)
  • Table 5-209 TEST UNIT READY Command Descriptor Block-Data Format
• 5.45 VERIFY Command (2Fh)
  • Table 5-210 VERIFY Command Descriptor Block-Data Format
  • Table 5-211 VERIFY Command-Field Descriptions
• 5.46 WRITE (6) Command (0Ah)
  • Table 5-212 WRITE (6) Command Descriptor Block-Data Format
  • Table 5-213 WRITE (6) Command -Field Descriptions
• 5.47 WRITE (10) Command (2Ah)
  • Table 5-214 WRITE (10) Command Descriptor Block-Data Format
  • Table 5-215 WRITE (10) Command -Field Descriptions
• 5.48 WRITE AND VERIFY Command (2Eh)
  • Table 5-216 WRITE AND VERIFY Command Descriptor Block-Data Format
  • Table 5-217 WRITE AND VERIFY Command -Field Descriptions
• 5.49 WRITE BUFFER Command (3Bh)
  • Table 5-218 WRITE BUFFER Command Descriptor Block-Data Format
  • Table 5-219 WRITE BUFFER Command -Field Descriptions
• 5.50 WRITE LONG Command (3Fh)
  • Table 5-220 WRITE LONG Command Descriptor Block-Data Format
  • Table 5-221 WRITE LONG Command-Field Descriptions
• 5.51 WRITE SAME Command (41h)
  • Table 5-222 WRITE SAME Command Descriptor Block-Data Format
  • Table 5-223 WRITE SAME Command-Field Descriptions
• 5.52 WRITE SKIP MASK Command (EAh)
  • Table 5-224 WRITE SKIP MASK Command Descriptor Block -Data Format
  • Table 5-225 WRITE SKIP MASK Command -Field Descriptions
• 6.1 KEY FEATURES
• 6.2 PREFETCH
• 6.3 WRITE-BACK CACHING
• 6.4 ZERO LATENCY READ/WRITE
• 6.5 DISCONNECT-RECONNECT
• 6.6 TRACK AND CYLINDER SKEWING
• 6.7 AVERAGE ACCESS TIME
• 6.8 EMBEDDED SERVO SYSTEM
• 6.9 DATA INTEGRITY AND SECURITY
  • 6.9.1 Media Error Protection
  • 6.9.2 Transfer Error Protection
  • 6.9.3 Addressing Error Protection
  • 6.9.4 Data Sector Reallocation Error Protection
  • 6.9.5 Data Verification
• 6.10 TAGGED COMMAND QUEUING
• 6.11 COMMAND REORDERING
• 6.12 BANDED RECORDING
• 6.13 SPECIAL FUNCTIONS
• 6.14 POWER MANAGEMENT
• 6.15 DIAGNOSTICS
  • 6.15.1 Power On Self Test (POST)
  • 6.15.2 Periodic Self-Adjustments
  • 6.15.3 Host Diagnostics
  • 6.15.4 Log Sense
• 6.16 ERROR RECOVERY
  • 6.16.1 Seek Error Recovery
  • 6.16.2 Data Read Errors
  • 6.16.3 Reallocation of Bad Blocks
• 6.17 SCSI CONFIGURED AUTOMATICALLY (SCAM)
• 6.18 THE ULTRA160 and ULTRA320 LOW VOLTAGE DIFFERENTIAL (LVD) SCSI INTERFACE
  • 6.18.1 DIFFSENS
  • 6.18.2 DIFFSENS SWITCHING
  • 6.18.3 DT AND ST CLOCKING
    • Figure 6-1 ST and DT CLocking
  • 6.18.4 CYCLIC REDUNDANCY CHECKING
  • 6.18.5 DOMAIN VALIDATION
  • 6.18.6 Adaptive Active Filter (AAF)
  • 6.18.7 Transmitter Pre-Compensation with Cutback
  • 6.18.8 Free Running Clock (FRC)
  • 6.18.9 Skew Compensation
  • 6.18.10 Information Unit Transfers
• 6.19 HOT PLUGGING/REMOVAL AND INSERTION OF SCSI DEVICES
  • 6.19.1 System Considerations
  • 6.19.2 APPLICABLE SCSI PHYSICAL DOCUMENTS
• A.1 SCSI-2/SCSI-3 Equivalent Terminology
  • Table A-1 SCSI-2/SCSI-3 Equivalent Terminology
• A.2 SCSI Commands and Messages
  • Table A-2 SCSI-3 Quick Reference – Commands
  • Table A-3 SCSI-3 Quick Reference – Messages
• A.3 SCSI Pages
  • Table A-4 SCSI-3 Quick Reference - Pages
• A.4 Sense Keys
  • Table A-5 SCSI-3 Quick Reference – Sense Keys
• A.5 Status Codes
  • Table A-6 SCSI-3 Quick Reference – Status Codes
• B.1 TRANSFER PERIOD FACTOR FIELD
  • Table B-1 Transfer Period Factor Field Values When PARL = 1
  • Table B-2 Transfer Period Factor Field Values When PARL = 0
• B.2 Settings for the QAS, DT, and IU fields
  • Table B-3 Settings for the QAS, DT, and IU Fields of the Negotiated Rate Information Page (INQUIR...