Maxtor ATLAS 10K III - Manual (Page 61)

Specifications
Maxtor Atlas 10K III 4-9
 '.'%641/#)0'6+% %10&+6+105
 '/+4(+ 5WUEGRVKDKNKV[
5 Volts/meter @ 100 MHz.
The drive functions normally when any exposed metal is subjected to
electrostatic discharge excluding the PCB. This electrostatic discharge must be at
a minimum interval of 30 seconds, either from a 150pF capacitor discharged
through a 150K
Ω
resistor or from a 100pF capacitor through a 500k
Ω
resistor.
 5GPUKVKXKV[ VQ /CIPGVKE (KGNFU
The Maxtor Atlas 10K III family of drives meets all specifications with a 6 gauss
field applied in any environment at 100 kHz.
0 – 5kV Average of <0.3 soft errors per discharge
5 – 10 kV Average of <1.0 soft errors per discharge
10 – 20 kV No permanent degradation