Maxtor ATLAS 10K III - Manual (Page 217)

SCSI Description
Maxtor Atlas 10K III 5-153
Table 5-181 ILLEGAL REQUEST Sense Key Field Pointer Bytes\Field Descriptions
The data format of the Progress Indication bytes associated with the NOT READY
sense key is shown in Table 5-182; the description of the data is contained in Table
5-183.
Table 5-182
NOT READY Sense Key - Progress Indication Bytes\Data Format
Table 5-183
NOT READY Sense Key - Progress Indication Bytes\Field Descriptions
The data format of the Retry Count bytes associated with the MEDIUM ERROR
or RECOVERED ERROR sense key is shown in Table 5-184; the description of
the data is contained in Table 5-185.
Table 5-184 MEDIUM ERROR or RECOVERED ERROR Sense Key - Retry Count-Data Format
(KGNF &GUETKRVKQP
SKSV Sense-Key Specific Valid
C/D Command/Data. When the value in this field is 1, the Field Pointer iden-
tifies the first byte in error in the Command Descriptor Block.
When 0, the Field Pointer identifies the first byte in error in the data pa-
rameters sent by the initiator in the data-out buffer transfer.
BPV Bit Pointer Valid. The drive does not support Bit-level resolution; the bit
value must be 0.
Bit Pointer The drive does not support Bit-level resolution; the bit value must be 0.
Field Pointer Indicates the first byte in error in either the Command Descriptor Block
or in the data parameters sent by the initiator.
$KV
$[VG
       
15 SKSV
= 1
Reserved
16 -
17
Progress Indication
(KGNF &GUETKRVKQP
SKSV Sense-Key Specific Valid
Progress Indication
Indication of percent complete for the FORMAT UNIT command.
The returned value is the numerator of a fraction that has 65536
(10000h) as the denominator (Progress Indication/10000h = per-
cent complete).
$KV
$[VG
       
15 SKSV
= 1
Reserved
16 -
17
Retry Count