Maxtor ATLAS 10K III - Manual (Page 47)

Installation
Maxtor Atlas 10K III 3-21
  2+0 &% 219'4 %100'%614  2+0 %100'%614
The recommended mating connectors for the +5 VDC and +12 VDC input power
connector are listed in Table 3-8.
6CDNG  
Power Connector (J1, Section A)
Note: J1, Section A, pins 2 and 3 are the +5 and +12 volt returns and
are connected together on the drive.
  2+0 /#6+0) %100'%614
The recommended mating connectors for the +5 VDC and +12 VDC input power
connector are listed in Table 3-8.
J1, SECTION A
(4-PIN) MATING CONNECTOR
TYPE AND PART NUMBER
(OR EQUIVALENT) PIN
NUMBER
VOLTAGE
LEVEL
1 +12 VDC 4-Pin Connector:
AMP P/N 1-480424-0
Loose piece contacts:
AMP P/N VS 60619-4
Strip contacts:
AMP P/N VS 61117-4
2 Ground
Return for
+12 VDC
3 Ground
Return for
+5 VDC
4 +5 VDC