Maxtor ATLAS 10K III - Manual (Page 75)

SCSI Description
Maxtor Atlas 10K III 5-11
READ BUFFER Allocation ---
READ BUFFER Header (4)
Mode-zero Buffer (512) or
Section of Drive’s DRAM or
READ BUFFER Desc. (4)
READ CAPACITY Allocation --- READ CAPACITY data (8)
READ DEFECT
DATA
Allocation ---
• Defect List (Hdr) (4)
• Defect Descriptors
READ LONG
Byte Transfer
(Must be 562) ---
• Data (512
• LBA Tag (2)
• EDC (2)
• ECC (46)
READ SKIP MASK
REASSIGN
BLOCKS
0 Defect List Header(4) Defect Descriptors
RECEIVE
DIAGNOSTIC
RESULTS
Allocation ---
Diagnostic Page
• ECC (25)
RELEASE 0 --- ---
REPORT DEVICE
IDENTIFIER
REQUEST SENSE Allocation --- Sense Data (18)
RESERVE
0
(Extent List
Option not
supported)
--- ---
REZERO UNIT 0 --- ---
Command Length in CDB Data Out (To Drive) Data In (To Initiator)
SEEK (6)(10) 0 --- ---
SEND DIAGNOS-
TIC
Parameter List Diagnostic Page ---
SET DEVICE
IDENTIFIER
START STOP UNIT 0 --- ---
SYNCHRONIZE
CACHE
0 --- ---
TEST UNIT READY 0 --- ---
VERIFY Transfer Data ---
WRITE (6)(10) Transfer Data ---
WRITE AND VERI-
FY
Transfer Data ---
WRITE BUFFER
Parameter List
Zeros (4)
Mode-zero buffer (512)
or Data to put into DRAM
or Microcode image
(262,144)
or Microcode image
(successive 16 KB pieces)
---
%QOOCPF .GPIVJ KP %&$ &CVC 1WV 6Q &TKXG &CVC +P 6Q +PKVKCVQT