Maxtor ATLAS 10K III - Manual (Page 213)

SCSI Description
Maxtor Atlas 10K III 5-149
0x05
Illegal
Request
0x1A 0x00 SCSI EC_PARAMETER_OVR Parameter list length error.
0x20 0x00 CMD EC_INV_COMMAND Invalid command.
0x20 0xFE SCSI EC_INV_ETM_CMD
ETM can't run with motor
spinning
0x20 0xFF MISC EC_SS_CODE_BAD Selfscan code not loaded or bad
0x21 0x00 CMD EC_INV_LBA Invalid LBA.
0x24 0x00 CMD EC_INV_CDB Invalid bits set in CDB.
0x25 0x00 CMD EC_INV_LUN Invalid LUN specified.
0x26 0x00 CMD EC_INV_PARAMETER Invalid fields in parameters.
0x26 0x02 CMD EC_BAD_PARAMETER Bad fields in parameters.
0x26 0x04 CMD EC_INV_PERRESREL
Invalid release of persistent res-
ervation
0x26 0x80 CMD EC_BAD_CODE_IMAGE
Invalid Code image checksum
failed.
0x26 0x81 CMD EC_INV_PRODUCT_CODE Incorrect product code loaded
0x2C 0x00 CMD EC_INV_CMD_SEQ Invalid command sequence.
0x3D 0x00 SCSI EC_INV_ID_MSG
Invalid bit set in identify
message
5GPUG
-G[
5GPUG
%QFG
5GPUG
3WCNKHKGT %CVGIQT[
/GUUCIG /GCPKPI