Maxtor ATLAS 10K III - Manual (Page 91)

SCSI Description
Maxtor Atlas 10K III 5-27
 &GXKEG +FGPVKHKECVKQP 2CIG J 5%5+  10.;
The Device Identification Page provides the means to retrieve zero or more
identification descriptors that apply to the logical unit (Table 5-33 and Table 5-34).
Table 5-33 Device Identification Page - Data Format
Note:
U160 SCSI uses Quantum an the Vendor ID while U320 SCSI
uses Maxtor as the Vendor ID.
Table 5-34 Device Identification Page-Field Description
$KV
$[VG
       
0
Peripheral Qualifier
(0)
Peripheral Device Type (0)
(Direct Access Device)
1 Page Code (83h)
2 Reserved
3 Page Length (24h for SCSI)
4 Reserved Code Set (1)
5 Reserved Association (0) Identifier Type (2)
6 Reserved
7 Identifier Length (8h)
8 – 15 EUI-64 (Value Stored in Configuration Page 30h)
16 Reserved Code Set (2)
17 Reserved Association (0) Identifier Type (1)
18 Reserved
19 Identifier Length (14h)
20 – 27 Vendor Identifier (“Maxtor “)
28 – 39 Drive Serial Number
(KGNF &GHKPKVKQP
Code Set
This field specifies the code set used for the Identifier field. Applicable val-
ues are:
Value Description
0h Reserved
1h The Identifier field contains binary values
2h The Identifier field contains ASCII graphic codes (code values 20h
through 7Eh)
3h – Fh Reserved
Association
This field specifies the entity with which the Identifier field is associated.
Applicable values are:
Value Description
0h The Identifier field is associated with the addressed physical or logical
device.
1h The identifier field is associated with the port that received the request.
2h – 3h Reserved