Maxtor ATLAS 10K III - Manual (Page 29)

Installation
Maxtor Atlas 10K III 3-3
 52#%' 4'37+4'/'065
The Maxtor Atlas 10K III hard disk drive is shipped without a faceplate and comes
in the following SCSI interface configurations:
• 68-pin Wide SCSI
• 80-pin SCA-2 SCSI
Figure 3-1 shows the mechanical dimensions of each of the drives.
(KIWTG   Dimensions for the Maxtor Atlas 10K III Hard Disk Drives
Shock Foot (typical)
101.60 mm
25.59 mm
146.50 mm
Shock Foot (typical)
101.60 mm
25.59 mm
146.50 mm