Maxtor ATLAS 10K III - Manual (Page 195)

SCSI Description
Maxtor Atlas 10K III 5-131
 4'2146 .705 %QOOCPF #J
The REPORT LUNS command requests that the peripheral device logical unit
numbers of known logical units in the target disk be sent to the applications client.
The command only returns information about the logical units to which commands
may be sent. The data format and field descriptions are shown in Table 5-169 and
Table 5-170 respectively.
Table 5-169 REPORT LUNS Command Descriptor Block-Data Format
Table 5-170 REPORT LUNS Command Descriptor Block-Field Description
Table 5-171 LUN Reporting Parameter List -Data Format
The LUN List Length field contains the length in bytes of the LUN list that can be
transferred. The LUN list length equals the number of logical unit numbers reported
multiplied by eight. If the allocation length in the CDB is too small to allow transfer
of information about all of the logical units configured, the LUN list length value is
not adjusted to reflect the truncation. The data format for the LUN Reporting
Parameter List is described in Table 5-171.
$KV
$[VG
       
0 Operation Code (A0h)
1 - 5 Reserved
6 – 9
(MSB)
Allocation Length
(LSB)
10 Reserved
11 Control
(KGNF &GUETKRVKQP
Allocation
Length
If the Allocation Length is not sufficient to contain the logical unit number val-
ues for all configured logical units, the device server still reports as many logical
number values as will fit in the Allocation Length.
The format of the report of configured logical units is shown in Table 5-171.
$KV
$[VG
       
0 - 3
(MSB)
LUN List Length (n – 7)
(LSB)
4 - 7 Reserved
8 - 15
(MSB)
LUN (first LUN)
(LSB)
n-7 –
n
LUN (last LUN, if more than one)