31 release (10) command (57h), 31 release (10) command (57h) -127, Table 5-163 – Maxtor ATLAS 10K III User Manual
Page 191: 4'.'#5' %qoocpf j
Advertising
SCSI Description
Maxtor Atlas 10K III
5-127
4'.'#5' %QOOCPF J
The RELEASE and the RESERVE commands are used for contention resolution in
multiple-initiator systems. The RELEASE (10) command is used to release a
previously reserved logical unit. The drive will not return an error if the initiator
attempts to release a reservation that is not currently valid. The data format and field
descriptions are shown in Table 5-163 and Table 5-164 respectively.
Table 5-163
RELEASE (10) Command Descriptor Block-Data Format
$KV
$[VG
0
Operation Code (57h)
1
Reserved
3rdPty
Reserved
LongID
Extent
2 Reservation
Identification
3
Third Party Device ID
4 - 6
Reserved
7 - 8
(MSB)
Parameter List Length
(LSB)
9
Control
Advertising