FUJITSU MHZ2250BJ - Manual (Page 152)

Interface
Table 5.27 WRITE SAME (2/2)
Byte(hex) Name Value Description
0C to13 Count (8 byte) Number of Sectors
14 to17 Pattern (4 byte)
If the Function Code is 0001h, this field contains a
32-bit pattern that is written on the media.
18 to 1FF (Reserved) - Reserved
* It is invalid excluding the description value.
Table 5.28 ERROR RECOVERY CONTROL
Byte(hex) Name Value Description
00, 01 Action Code 0003h ERROR RECOVERY CONTROL
0001h
Set New Value
The retry processing when making an error in the
specified timer
02, 03
Function
Code
0002h
Return Current Value
The timer value of the error recovery being set now is
displayed in SN /SC field.
0001h Read Timer
04, 05
Selection
Code
0002h Write Timer
06, 07 Value (2 byte)
Set to Timer Value (x 100 ms)
Minimum value is 5 sec.
(ex.) 0000h: Disable timeout
0031h: Invalid
0032h: 5000 ms (5 s)
08 to 1FF (Reserved) - Reserved
* It is invalid excluding the description value.
5-78 C141-E280