FUJITSU MHZ2250BJ - Manual (Page 8)

Preface
Hot Plug
These drives support Hot Plug which is based on Serial ATA Revision 2.6
Specification.
However, the disk drive installation and removal notes on safety precautions with
regard to hot-plugging vary depending on the specific requirements and
environment-related conditions of the system to which the drive is connected by
hot-plugging.
When using the drive under general conditions of use (i.e., without hot-plugging),
observe the important alert messages and notes on safety precautions given in this
manual.
For the electrical recommendation to the host system which supports hot-plugging
with this drives, refer to Section 5.1.6.
Compliance with Administration on the Control of Pollution Caused by Electronic
Information Products of the People's Republic of China
This product is shipped as a component to manufacture the final products. Therefore, the packaging material
code provided in GB18455-2001 is not marked on any packaging part of this product.
iv C141-E280