FUJITSU MHZ2250BJ - Manual (Page 191)

5.3 Host Commands
*29 WORD 128
Bits 15-9: Reserved
Bit 8: Security level. 0: High, 1: Maximum
Bits 7-6: Reserved
Bit 5: '1' = Enhanced security erase supported
Bit 4: '1' = Security counter expired
Bit 3: '1' = Security frozen
Bit 2: '1' = Security locked
Bit 1: '1' = Security enabled
Bit 0: '1' = Security supported
*30 WORD 206: SCT Command Transport
Bits 15-6: Reserved
Bit 5: '1' = SCT Data Tables supported.
Bit 4: '1' = SCT Features Control supported.
Bit 3: '1' = SCT Error Recovery Control supported.
Bit 2: '1' = SCT Write Same supported.
Bit 1: '1' = SCT Long Sector Access supported.
Bit 0: '1' = SCT Command Transport supported
*31 WORD 210-211: Write Read Verify Sector Count Mode 3 Only.
The number of sectors to be verified
If Write Read Verify features set is enabled. (Mode 3)
Value: 400h – 40000h sectors
*32 WORD 212-213: Write Read Verify Sector Count Mode 2 Only.
The number of sectors to be verified
If Write Read Verify features set is enabled. (Mode 2)
Value: 10000h sectors
C141-E280 5-117