FUJITSU MHZ2250BJ User Manual
Page 188
Interface
Bit 6:
'1' = Enables the read cache function. From the SET FEATURES
command
Bit 5:
'1' = Enables the write cache function.
Bit 4:
'1' = Enables the P PACKET command set.
Bit 3:
'1' = Supports the Power Management function.
Bit 2:
'1' = Supports the Removable Media function.
Bit 1:
'1' = From the SECURITY SET PASSWORD command
Bit 0:
'1' = From the SMART ENABLE OPERATION command
*20 WORD 86
Bit 15:
'1' = The values in WORD119-120 are valid.
Bit 14:
Reserved
Bits 13-10: Same definition as WORD 83.
Bit 9:
'1' = Enables the Automatic Acoustic Management function from
the SET FEATURES command
Bit 8:
'1' = From the SET MAX SET PASSWORD command
Bits 7-6:
Same definition as WORD 83.
Bit 5:
'1' = Enables the Power-Up In Standby function.
Bit 4:
'1' = Enables the Removable Media Status Notification function.
Bit 3:
'1' = Enables the Advanced Power Management function.
Bits 2-0:
Same definition as WORD 83.
*21 WORD 87
Bit 15:
= 0 The device always returns the fixed value indicated on the left.
Bit 14:
= 1 The device always returns the fixed value indicated on the left.
Bits 13-0: Same definition as WORD 84.
*22 WORD 88
Bit 15-8:
Currently used Ultra DMA transfer mode
Bit 14:
'1' = Mode 6 is selected.
Bit 13:
'1' = Mode 5 is selected.
Bit 12:
'1' = Mode 4 is selected.
Bit 11:
'1' = Mode 3 is selected.
5-114
C141-E280