Device, Host – FUJITSU MHZ2250BJ User Manual
Page 251
Advertising
5.4 Command Protocol
•
SLEEP
•
DEVICE CONFIGRATION RESTORE
•
DEVICE CONFIGRATION FREEZE LOCK
•
WRITE UNCORRECTABLE EXT
The following is the protocol for command execution without data transfer:
1) The device receives a non-data command with the RegHD FIS.
2) The device executes the received command.
3) Command execution is completed.
4) The device reports the completion of command execution by sending to the
host the RegDH FIS with 1 set in the I bit.
Device
Host
RegHD
RegDH
Figure 5.13 Non-data command protocol
C141-E280
5-177
Advertising