FUJITSU MHZ2250BJ - Manual (Page 189)

5.3 Host Commands
Bit 10: '1' = Mode 2 is selected.
Bit 9: '1' = Mode 1 is selected.
Bit 8: '1' = Mode 0 is selected.
Bits 7-0: Supportable Ultra DMA transfer mode
Bit 6: '1' = Supports the Mode 6
Bit 5: '1' = Supports the Mode 5
Bit 4: '1' = Supports the Mode 4
Bit 3: '1' = Supports the Mode 3
Bit 2: '1' = Supports the Mode 2
Bit 1: '1' = Supports the Mode 1
Bit 0: '1' = Supports the Mode 0
*23 WORD 89
Execution time of SECURITY ERASE UNIT command
Value Time
0 Undefined
1-254 Display Value
× 2 minutes
255 More than 508 minutes
*24 WORD 94
Bits 15-8: X 'FE' Recommended acoustic management value.
Bits 7-0: X 'XX' Current set value.
FE-C0: Performance mode
BF-80: Acoustic mode
00: Acoustic management is unused it. (It is same as "FE-CO")
*25 WORD 100-103
Number of total sectors with accessible user in 48bit LBA command
C141-E280 5-115