FUJITSU MHZ2250BJ - Manual (Page 157)

5.3 Host Commands
• SCT WRITE DATA (SN = E1h, FR = D6h)
This command writes the data of the number of sectors for which the data
specified with SCT SET COMMAND and number of sectors specified Sector
Count Field.
28-bit command
At command issuance (Shadow Block Registers setting)
CM 1 1 0 1 1 1 1 1
DH x x x DV xx
CH
CL
SN
SC
FR
Key (C2h)
Key (4Fh)
E1h
xx
D6h
At command completion (Shadow Block Registers contents to be read)
ST Status information
DH x x x DV xx
CH
CL
SN
SC
ER
xx
xx
xx
xx
Error information
SCT WRITE DATA Command issue procedure.
1. Issue the SCT set command of action code 0002h and function code 0002h.
2. Issue the SCT write command and the write data is transmitted to the device.
C141-E280 5-83