Recording source setting [rec source sel – Fostex PD606 User Manual
Page 146
146
Location Recorder Model PD606
Chapter 8: MENU mode/SYS SETUP menu
The “Rec source sel” menu item selects record sources in pairs.
Recording source setting [Rec source sel]
3)
Use the [MENU] dial to select the “Rec source sel” menu item and press the [ENTER/YES] key.
The display now shows the screen for selecting the record sources in pairs.
1)
While the unit is stopped, press the [SHIFT] key to light the SHIFT indicator, followed by the
[ENTER/YES] key.
2)
While “SYS SETUP” is highlighted, press the [ENTER/YES] key.
The display now shows the SYS SETUP menu screen.
5)
Use the [MENU] dial to select the desired option and press the [ENTER/YES] key to confirm
your setting.
4)
Use the [MENU] dial to select a channel pair and press the [ENTER/YES] key.
The current selection starts flashing and you can now select the desired option.
You can select "Digital" or "Analog" for CH1-2, CH3-4 and CH5-6 (the default is "Digital"),
while you can select "Digital" or "ST BUS" for ST-LR (the default is "ST BUS").
Options
The channel pair accepts the corresponding digital input signal from the [DIGITAL I/O] con-
nector and you can record the digital signal to the corresponding track pair.
Digital
Analog
The channel pair accepts the analog input signals from the corresponding [ANALOG MIC/
LINE INPUT] connectors and you can record the analog signals to the corresponding track
pair.
ST-LR
CH1-2, CH3-4, CH5-6
Digital
ST BUS
The channels accept digital input 7-8 signal from the [DIGITAL I/O] connector and you can
record the digital signal to the stereo L/R tracks.
You can record the stereo buss signals (mixed signals of channels 1 through 6) to the stereo
L/R tracks.
Flashing