Pre/post fader selection [disk feed – Fostex PD606 User Manual
Page 169
169
Location Recorder Model PD606
Chapter 8: MENU mode/SYS SETUP menu
Pre/post fader selection [Disk Feed]
4)
Use the [MENU] dial to select the desired option and press the [ENTER/YES] key to confirm
your setting.
The "Disk Feed" menu item selects whether you record pre or post fader signals to tracks 1
through 6.
By default "pre fader" is selected, so signals are directly sent to tracks 1 through 6 without
being affected by the [SEND LEVEL] controls.
Flashing
3)
Use the [MENU] dial to select the “Disk Feed” menu item and press the [ENTER/YES] key.
The current setting starts flashing and you can now select the desired option.
1)
While the unit is stopped, press the [SHIFT] key to light the SHIFT indicator, followed by the
[ENTER/YES] key.
2)
While “SYS SETUP” is highlighted, press the [ENTER/YES] key.
The display now shows the SYS SETUP menu screen.
5)
Press the [EXIT] key repeatedly until you exit the MENU mode.
The signal unaffected by the [SEND LEVEL] control is recorded.
Pre
Post
The signal affected by the [SEND LEVEL] control is directly recorded.
You can select from among “Pre” or “Post” (the default is “Pre”).
Options
When setting the "Disc Feed" item to "Post", the
icon below appears on the left of the Home
screen.