Time code output while paused [rep pause tc – Fostex PD606 User Manual
Page 193
193
Location Recorder Model PD606
Chapter 8: MENU mode/TC SETUP menu
Using the "Rep pause TC" menu item, you can select whether time code is output from the
[TIME CODE OUTPUT] connector or not while the recorder is paused.
When the "Sel TC Out" menu item is set to "Repro" and the unit is stopped (or paused), no
time code is output.
When the "Sel TC Out" menu item is set to "Repro" and the unit is stopped (or paused), a
paused time code value (same time code value) is output intermittently.
Time code output while paused [Rep pause TC]
2)
Use the [MENU] dial to select the “Rep pause TC” menu item, and press the [ENTER/YES] key.
The current setting starts flashing and you can now select "On" or "Off".
1)
When the unit is stopped, press the [SHIFT] key to light the [SHIFT] indicator, followed by the
[TIME/TC SET] key.
The display now shows the TC SETUP menu screen.
3)
Use the [MENU] dial to select the desired option, and press the [ENTER/YES] key to confirm
your selection.
4)
Press the [EXIT] key repeatedly until you exit the MENU mode.
Flashing
On
Off
You can select from among “On” and “Off” (the default is “Off”).
Options