Fostex PD606 - Manual (Page 84)

84
Location Recorder Model PD606
Chapter 5: Recording/Playback
Monitor mode select switch
[MONITOR] control
[PHONES] jack
7
PQRS
GHI
4
space
1
LIGHT EXIT
MONO
ST
SOLO
C2
C3
C4
MS
FILE SEL TIME QUICK SET
PHONES
MONITOR
MAX MIN
4
3
2
1
5
6
L
R
ON
OFF
POWER
DVD HDD
ACCESS
PD606 LOCATION RECORDER
SHIFT CONTRAST MENU DRV,PAT. TC SET BATT
1 / 3 / 5 + 2 / 4 / 6
ST BUS
READY TRK
C1
ENTER/YES
LINK MASTER
Monitor select dial
Monitoring recording signals
<Note>: By default, the internal monitor speaker is automatically muted during record-
ing. You can select on or off of this mute function via the "Speaker mute" item in the
"SYS SETUP" menu of the MENU mode (see page 164).
You can monitor recording signals via headphones or the internal monitor speaker.
While a plug is inserted to the [PHONES] jack, the internal speaker automatically turns off,
and you can monitor the signals only via headphones.
The monitor level can be adjusted by the [MONITOR] control. This control can be pushed-
lock. By pushing down the control, you can put it down to the panel height level. By pressing
the control again, it comes out and you can rotate the control to adjust the level.
SOLO ST MONO
1
1/3/5+2/4/6
2
ST BUS
3
READY TRK
4 C1
5 C2
6 C3
L C4
R MS
INPUT Playback INPUT Playback INPUT Playback
CH1
CH2
CH3
CH4
CH5
CH6
BUS L
BUS R
L: CH1+3+5
R: CH2+4+6
L: BUS L
R: BUS R
Ready track
CUSTOM 1
CUSTOM 2
CUSTOM 3
CUSTOM 4
Recorded
tracks
in the file
L: BUS MS L
R: BUS MS R
MS L
CUSTOM 4
CUSTOM 3
CUSTOM 2
CUSTOM 1
Ready track
BUS L+R
CH1+2+3+4+5+6
Recorded
tracks
in the file
* You can define four custom settings (CUSTOM 1 through CUSTOM 4) using the "Monitor Custom" item in
the "SYS SETUP" menu of the MENU mode (see page 162).
SOLO Monitors a solo track/input channel.
ST
MONO Monitors the mono mix of the multiple tracks/inputs (with four custom settings).
Monitors the stereo mix of the multiple tracks/inputs (with four custom settings).
Depending on the settings of the monitor mode select switch and monitor select dial, you can
monitor the sound as shown on the table below.